Amiga hardware info, help and support with a focus (but not limited to) North American NTSC experiences. Open to all.
User avatar
TenLeftFingers

Re: Indivision AGA 1200 MK2cr-Setup help

by TenLeftFingers Thu Jan 11, 2018 12:43 pm

No problem. I'll do one tomorrow. I'm not sure what time though.

Get some rest and I hope you feel better soon <3
User avatar
XsamX1987

Re: Indivision AGA 1200 MK2cr-Setup help

by XsamX1987 Thu Jan 11, 2018 1:52 pm

That's fine any time

and thank you I will try.

:)

TenLeftFingers wrote:No problem. I'll do one tomorrow. I'm not sure what time though.

Get some rest and I hope you feel better soon <3
User avatar
TenLeftFingers

Re: Indivision AGA 1200 MK2cr-Setup help

by TenLeftFingers Fri Jan 12, 2018 4:04 am

Try this: https://www.youtube.com/watch?v=Y8QiPat ... e=youtu.be

I'm getting errors at the end myself now due to my Prefs folder being absent. But this doesn't happen on my actual Amiga with OS 3.1 installed. It completes and leaves the application available in the Prefs drawer.
User avatar
XsamX1987

Re: Indivision AGA 1200 MK2cr-Setup help

by XsamX1987 Sat Jan 13, 2018 5:58 am

Yea it should work fine on this end, I will try it out later.
User avatar
XsamX1987

Re: Indivision AGA 1200 MK2cr-Setup help

by XsamX1987 Sat Jan 13, 2018 10:56 am

You are the best its now installed and I can what mode do you recommend :)
User avatar
TenLeftFingers

Re: Indivision AGA 1200 MK2cr-Setup help

by TenLeftFingers Sat Jan 13, 2018 12:06 pm

You'll find people using fairly high resolutions. But really you need to start low and work your way up.

For screen modes I've set Pal to 640x480 and High GFX 1024 x 768. The former gets activated by most games while I use the latter for Workbench.

But this is for my monitor.

The software is very poor. It takes time to get the hang of it. Good luck :)
User avatar
XsamX1987

Re: Indivision AGA 1200 MK2cr-Setup help

by XsamX1987 Sat Jan 13, 2018 4:00 pm

Thank you :)
User avatar
XsamX1987

Re: Indivision AGA 1200 MK2cr-Setup help

by XsamX1987 Fri Jan 19, 2018 12:56 pm

Ok so new problem

i currently have my indivision set to pal 1280x1024 60hz and i see this

i have tried fixing this in over scan but no luck :(
User avatar
Bulletdust

Re: Indivision AGA 1200 MK2cr-Setup help

by Bulletdust Fri Jan 19, 2018 2:35 pm

XsamX1987 wrote:Ok so new problem

i currently have my indivision set to pal 1280x1024 60hz and i see this

i have tried fixing this in over scan but no luck :(


The Indi AGA is a PITA to set up, I managed to set mine up perfectly, but it was mostly all guesswork in relation to overscan and the like.

However, that monitor looks like a 16:9 widescreen monitor and 1280 x 1024 is a 4:3 non widescreen resolution? Quite possible why you're seeing what you're seeing?
User avatar
TenLeftFingers

Re: Indivision AGA 1200 MK2cr-Setup help

by TenLeftFingers Sun Jan 21, 2018 6:09 pm

I have no ideas to offer. I would need to reproduce the issue (which I cant) and then risk not being able to fix it myself.

As bulletdust said, the software is very poor but perservere and you should get there.

Who is online

Users browsing this forum: No registered users and 2 guests