Hi all, based on the EzdineG A1000 relocator I´ve made a remix Amiga 1000 relocator that includes a 27c160 EPROM (2MB) which can hold up to 4 different kickstarts. It also has a small board with a rotary switch to select the appropiate kickstart.
The installation is like EzdineG explained in another post, anyway here you have some pictures of the mod:
1 - Desolder U6J, put a socket and leave out the pin number 17
2 - Solder a resistor between pins 1 and 20 of U4K (I used a 4K7 1206 SMD resistor with 2 wires)
3 - Solder a wire to the via shown in the picture near U5M (I recommend to use a dupont wire and cut the connector of one side)