Site Registration is temporarily disabled. Check back in early January, 2025.
Current members may Login.
VBB mod
- Attachments
-
-
m0c
- Utrecht, Netherlands
...but you only have 1MB of chipram installed. I'm not sure if this is supposed to work. Maybe @PRS can shed a light on that, as he has experimented with different sorts and amounts of chipram and Agnus versions.
David Dunklee can provide different GALs that allow loading kickstart either from floppy or from the Parceiro II, depending solely on the position of the Parceiro's selection switch. No more flipping of jumper JP100 needed.I’m also using a Parceiro II
Thanks, I already have the custom code on my GALs from David 
just need to sort this ram out now.
just need to sort this ram out now.I think the Agnus just manages however much chipram is installed, like the fatter Agnus on the A500 will do 512K or 1MB, and 2MB Agnus on the A500 plus will do 1 or 2MB. Unless theres any weirdness introduced from the Rejuvenator, it should be fine to use a 2MB Agnus with only 1MB installed.
Edit: koolvin just posted me some notes from the Rejuvenator that says it has to be 2MB installed with a 2MB Agnus. I probably did try that when I didn't have a working set of 2MB chips so DOH!
I want to leave my 3.1 ROM installed but can't do that and use the Parceiro II in any switch position. Only workaround for this I thought would be to use a ROM switcher and have nothing in the 2nd socket when I wanted to use the Parceiro II. I know it's weird but I would like to use the ROM chip on the board. If the Parceiro could use the ROM built-in scsi.device and then load drivers on boot for any larger drives/filesystems that would be the grail for me. Also allowing a user's fresh install of a basic FFS small oldskool partitions.
Edit: koolvin just posted me some notes from the Rejuvenator that says it has to be 2MB installed with a 2MB Agnus. I probably did try that when I didn't have a working set of 2MB chips so DOH!
I want to leave my 3.1 ROM installed but can't do that and use the Parceiro II in any switch position. Only workaround for this I thought would be to use a ROM switcher and have nothing in the 2nd socket when I wanted to use the Parceiro II. I know it's weird but I would like to use the ROM chip on the board. If the Parceiro could use the ROM built-in scsi.device and then load drivers on boot for any larger drives/filesystems that would be the grail for me. Also allowing a user's fresh install of a basic FFS small oldskool partitions.
Finally finished my board and, after only 8 hours trying to align the pins, it works!!
It's running with a 1MB agnus since I found that 8375 adapter board impossible to solder, but I'm still hoping to run it with 2MB using a regular Mega-chip board (which I've seen some people use in this thread already).
Will I need to bridge the 2mb agnus jumper when using a megachip adapter? (And/or has anyone found a more elegant solution for installing a 2MB 8375?)
Will I need to bridge the 2mb agnus jumper when using a megachip adapter? (And/or has anyone found a more elegant solution for installing a 2MB 8375?)
-
A1-X1000
- Toronto, Canada
@ Marchie
congrats & gives me motivation to get back to soldering again as this damn things called 'work' and 'honey do' lists keep getting in the way dammit
congrats & gives me motivation to get back to soldering again as this damn things called 'work' and 'honey do' lists keep getting in the way dammit
-
Mr.Toast
- Roseville, CA
Has anyone else built fantoman's Agnus adapter? I recently had a pcb pressed into my hands in anticipation of a rejuvie build and I am a bit perplexed as to how to assemble it. Most of the photos on the github show a finished product-but I have no clue how and what order these components go in.
Would love some breadcrumbs as I believe I have all the components on hand to knock this piece out.
Chris.
Would love some breadcrumbs as I believe I have all the components on hand to knock this piece out.
Chris.
I recently obtained a Rejuvenator and last night I spent an extremely frustrating evening some quality time with my vintage computer aligning the pins and getting it installed!
However, it's not working. I get a black screen at boot, with J100 set to either position, and a Kickstart 1.3 ROM installed. Same problem with the ROM socket empty.
The power LED blinks, but no colors on the monitor at all.
Interestingly, it does boot into DiagROM (with J100 set to open, and a ROM I burned and installed into the socket on the Rejuvenator), the chipram is detected, and it passes all tests!
Any idea what might be going on?
The power LED blinks, but no colors on the monitor at all.
Interestingly, it does boot into DiagROM (with J100 set to open, and a ROM I burned and installed into the socket on the Rejuvenator), the chipram is detected, and it passes all tests!
Any idea what might be going on?
- Attachments
-
For me the Rejuvenator is completely impossible to install w/o using pin guides of some sort. A friend of mine designed 3D printed ones, which I use now any time an install occurs. The guides hold all of the pins steady and become a permanent (unseen) part of the machine as you push the board down.
As such, it almost guarantees the pins are all seated correctly and none have become bent on the way down. I say all of this because my main fear is a bent pin isn't making contact somewhere.
Note: your board is so low, my second thought is I wonder if the board is shorting out on something below.
As such, it almost guarantees the pins are all seated correctly and none have become bent on the way down. I say all of this because my main fear is a bent pin isn't making contact somewhere.
Note: your board is so low, my second thought is I wonder if the board is shorting out on something below.