X-PANDER 3 - CARTRIDGE PORT EXPANDER WITH 3 SLOTS
The X-Pander 3 opens up a wealth of expansion options for your Commodore 64, SX64, C128, or C128D. Utilize multiple cartridges at once, or easily switch cartridges without removal.
Features
3 individually-selectable expansion ports.
Power indicators for each port.
Ability to swap IO select lines on some ports.
Easily accessed piano-style configuration switches.
Top-loading or back-loading third port.
Reset switch.
The 3rd and 4th ports can be used at the same time, providing the ability to use up to 4 expansion ports at once.
As you can see, I've also got a 3D-printed case for the X-Pander 3 from a Canadian eBay vendor. The case has a good quality, but I encountered a slight problem:
The guy who made the cases had an X-Pander version where the capacitors had a heigt of 6mm, so this was the template he was unsing for creating the case. However, the X-Pander version I got had a set of different capacitors with a height of about 12mm, see picture A and B.
The problem I now have is the the case won't close due to the increased height of the capacitors, see picture C and D. Since I do not want to drill holes into the case in order to make it fit the actual capacitors, I decided to buy new capacitors with a height of 5mm and replace the existing one. I still have to do this though...