User avatar
Tandrews_ny
Rochester, NY

Posted Sun Feb 23, 2020 8:14 pm

sportbikepilot wrote:
Sun Feb 23, 2020 1:26 pm
Step away from it for a few days. I go through the same feeling when I can't get something to work properly. I find when I start getting fussy or annoyed, I tend to make problems a lot worse.

Best advice I can offer from my experience is set it aside for a few days and go do something else. Come back to it with fresh eyes and a clear mind, and you'd be surprised what you find and how quickly you find it.

Chris
I was able to get diagrom booting... finally. But this is what I'm getting
See photo

The serial output is just a single block vs ASCII. However it is clearly text as it's very long

User avatar
nadoom

Posted Tue Feb 25, 2020 5:57 pm

Acill might have a board spare if you fancy a lift and shift of the components to a new board. But it sounds like you are tantalisingly close to sorting it!

User avatar
Tandrews_ny
Rochester, NY

Posted Wed Feb 26, 2020 7:46 am

Board worked before cleaning and I've tested all parts in my a500. It's a trace issue from cleanup.
nadoom wrote:
Tue Feb 25, 2020 5:57 pm
Acill might have a board spare if you fancy a lift and shift of the components to a new board. But it sounds like you are tantalisingly close to sorting it!





Return to “Hardware”