I used my lockdown's time to work on my A1000 and I began from the hardware integration/modification, not the kickstart part
The A1000 is now closed :
The new floppy drive is inside the A1000 (but I need to reduce the rear of the button because disks aren't recognised when the A1000 is closed, the button is a little bit blocked behind the front panel...) and the 1010 is beside. Take a look at this 1010 :
It's a little bit yellowed... but, inside, it's incredible :
Classic 520 and HxC Slim SD are hidden in it, and the switch of the DF0 Selector is attached at the rear of the 1010. I maked a "trompe l'oeil" with the disk (it was a non-working disk), cutted and glued :
And for finishing, we "burned" our name (my pseudo, first name of my second son, first name and pseudo of my first son, pseudo of my wive, tatoo number and paw of our cat ^^) in the top case of the 1010 (it's, of course, a wink to the 1000) :
I took the idea from Frootloop (with an ACA500 in a 1010), here on this forum, thank to him.
This afternoon and night, I tried to make a kickstart 1.3 with scsi.device and I failed... (I tried to make a 256 ko rom to put in a disk with WriteKickDisk, without success, and I tried to make a 512 ko rom flashed in the C520... not better...).
The Classic 520 is really awesome and I'm really happy of the HxC. I didn't say my last word ! I'll success
Beside this, I installed Excellence! 2.0 and it's a very nice word processor. The only problem, I think I'll never find a french dictionary or a french thesaurus for a 1.3 word processor
It's time for me to go to the bed (1:20 here in France). Tomorrow, it's Easter, so Happy Easter everybody ! And take care of yourself and your family !